06
Mar
 2024
Safe Use of Fixed Workshop Machinery All Events
Event Start: 09:00
Event Finish: 17:00

This course is designed to instruct learners on the safe use of bandsaws, circular saws and planer thicknessers. The unit also aims to instruct learners on the safe procedures for carrying out associated tasks such as blade changing.

Dates: 6th – 7th March 2024

Closing Date: 2nd February 2024

 

Audience

School Technical Support Staff. Access to this unit will be at the discretion of the centre but there must be evidence that learners have undergone training in the use of fixed workshop machinery. This training can either be college, school based or through a craft apprenticeship.

Rationale

This course forms part of a suite of competency based CLPL for support staff.

Course Leader

Chris Kerr
01383 626070
chris kerr@sserc.scot

Location

The course will be held at SSERC in Dunfermline. Our SSERC buildings are at 2 Pitreavie Court, Dunfermline, KY11 8UU. SSERC is a short (5-10 minutes) walk from Rosyth railway station and close to the end of the A823(M) spur off Junction 2 of the M90 motorway. Car journey times (approximately): Edinburgh – 30 min; Glasgow – 60 min; Aberdeen – 2.5 hours; Inverness – 3 hours.

Cost

£220

Funding

None available

The STEM Inspiration awards

The STEM Inspiration awards are a free award scheme, designed to celebrate individuals and organisations working to inspire young people in STEM subjects.

Outcomes

By the end of this course you should be able to:

  • Demonstrate knowledge and understanding related to the safe use of the bandsaw, circular saw and planer thicknesser.
  • Apply safety precautions necessary for the safe operation of the bandsaw, circular saw and planer thicknesser.
  • Understand the functions of guards and safety devices.
  • Safely set up the tool settings and prepare the bandsaw, circular saw and planer thicknesser for use.
  • Safely operate the bandsaw, circular saw and planer thicknesser

Why Should You Attend?

Further your knowledge on safety procedures and good working practices for fixed workshop machinery.

Programme

Day 1

  • Health & Safety Legislation
  • Practical Demonstration: Bandsaw
  • Practical Demonstration: Circular Saw
  • Practical Demonstration: Planer Thicknesser
  • Practical Demonstration: Blade changing procedures on above machines
  • Practical Assessment: Blade changing procedures on above machines

Day 2

  • Practical Assessment
  • Written Assessment
  • Plenary session and Q&As

Commitment

Attend on 2 days and undergo both written and practical assessment. It is recommended that a refresher course be undertaken every 5 years.

SSERC is a Company Limited by Guarantee and a registered educational charity.

Headquarters
1-3 Pitreavie Court,
South Pitreavie Business Park,
Dunfermline,
KY11 8UU

Registered Office
Morton Fraser MacRoberts LLP,
Level 5
9 Haymarket Square
Edinburgh
EH3 8RY

Material on this website, including text and images, is protected by copyright. It may not be copied, reproduced, republished, downloaded, posted, broadcast or transmitted in any way except for your own personal, non-commercial use, or for educational use. Prior written consent of the copyright holder must be obtained for any other use of material. Copyright in all materials and/or works comprising or contained within this website remains with SSERC and other copyright owner(s) as specified. No part of this site or sub-domains of this site may be distributed or copied for any commercial purpose

© Copyright 2024 Copyright SSERC Ltd. All Rights Reserved.