Label the underside of the plates with initials, date, sample and dilution. For greatest accuracy, each dilution should be plated in triplicate and the average of the three counts used.
Remove a sterile 0.1 cm3 syringe or pipette tip from its pack/container. Do not touch the parts which will come in contact with organism. If using a pipette, carefully attach to the dispenser.
Start with the highest dilution (i.e. 10 -7).
Using aseptic technique (i.e. flaming the neck of the tube or bottle after removal and before replacement of its lid), remove exactly 0.1 cm3 of the sample and transfer to the surface of an appropriately labelled sterile nutrient agar plate.
Using aseptic technique, spread the sample evenly across the plate with the glass spreader.
Place syringe or pipette tip into discard jar.
Repeat steps 5 – 7 for dilutions 10-6 , 10-5 and 10-4.
When the plates are dry, incubate upside down at the appropriate temperature for the appropriate time.
After incubation, select plates for counting that contain 30 – 300 colonies (samples which contain <30 colonies/0.1 diluent are subject to large fluctuations in numbers or sampling errors, plates which contain >300 colonies are likely to have overlapping colonies).
Count accurately and record the number of colonies on each plate.
Calculate the concentration of viable cells or colony forming units (cfu) in the original suspension.
SSERC is a Company Limited by Guarantee (Scottish Company No. SC131509) and a registered educational charity (Scottish Charity No. SCO17884). Registered Office – 5th Floor, Quartermile Two, 2 Lister Square, Edinburgh EH3 9GL